Table of Contents
Advertisement
REMEMBER
-
The parametric EQ settings are stored locally in the Precision iDP
each preset.
!
-
Recalling any preset will recall the parametric EQ settings stored along with that
particular preset.
-
However, the EQ graph in the parametric EQ screen will always display the
EQ settings of the most recently recalled backup file.
Not necessarily showing the EQ graph matching the current preset.
See the <Backup> function.
EQ Link
Press this button in the Monitor Equalizer menu to access the <EQ Link> menu as shown in Fig.14.
Fig.14. EQ Link menu
Creating EQ groups can save time. For example, in the 6.1 system configuration shown in Fig. 14,
the Left front, Centre and Right monitors are grouped together. The Left surround, Centre surround
and Right surround monitors are also linked together into another group.
After grouping the monitors together in this way, any EQ applied to one of the monitors in a common
group will be copied to the others in that same linked group. Be sure to link the monitors into groups
before you apply EQ.
Add or remove monitors to the three groups by highlighting the monitor and assigning it to its respective
group by pressing the <Add G1/2/3> button. Activate or deactivate by checking or un-checking the
<G1-G3 Active> button.
TM
monitors with
21
Advertisement
Table of Contents
