Table of Contents
Advertisement
Monitor Parameters /cont.
<LFE Gain>
This function is only available on the subwoofers. The fader can be used to boost
or cut the gain of the LFE channel in the range of -6 to +8dB.
<Phase>
This function is only available on the subwoofers. The fader can be used to adjust
the phase (time alignment) if the Subwoofer cannot be placed in an
optimum position. There are individual phase settings for each of the Bass Management
crossover frequencies. When set, these are stored as Global settings.
<Equalize>
The faders can be used to adjust the bass & treble for the selected monitors in
the range of -6 to +8dB. The Equalize parameters are only active when the parametric
EQ function is inactive.
There is a <Lck> (Lock) facility to disable the 'equalize' facility in case of
accidental activation. If locked then no alteration is possible from the master monitor
or iDP SOFT
Parametric EQ
To access the Parametric EQ page:
In the Main page click on the monitor you would like to EQ or select a monitor from
the drop-down menu and press the <Edit> button.
You are now in the Monitor page.
Check the <EQ on> box and press the <Param.EQ> button to enter the
Parametric EQ window as displayed in Fig. 12.
Fig.12. Monitor parameters and
Parametric EQ windows.
TM
.
19
Advertisement
Table of Contents
