Table of Contents
Advertisement
5. Function menu tasks
The horizontal row of six buttons in the Function section of the main screen perform the following tasks:
<Setup>
This operation of the setup function is to open the <Precision setup> window to
allow selection of the monitor configuration being installed and to assign tasks to
each component in that system.
The actions involved are fully described in section 3 of this manual – Initial
System Setup.
<Reset>
Press this button to access the <Reset> menu shown in Fig. 6 in which three main
functions can be accessed.
Fig.6. Reset function menu
<Clear Setup for Network>
This reset procedure clears all of the network settings (both the monitor tasks
and setup)
<Clear Monitor Settings>
All stored global and local parameters in the connected monitors are reset.
Presets and network settings will not be affected.
<Factory Reset>
This reset procedure will delete all global and local parameter settings as well
as preset and network settings.
11
Advertisement
Table of Contents
