Table of Contents
Advertisement
A C T I V E
S T U D I O
M O N I T O R S
<Sleep Mode>
To further minimize power consumption when the monitors are not in use,
Sleep mode can be used. The sleep mode options are -1hr, 1.5hrs, 2.5hrs, 3hrs
& 5hrs. To resume normal operation a command must be sent to the system,
for example, a master volume change or preset recall. This can be any
command sent via the master display of any master monitor on the network, the
remote, iDP SOFT
<Backlight>
Three modes of operation can be set for the backlight display on the master
Precision monitors.
<Store Master Volume>
16
TM
or the PC-iP
On
The display backlight will stay on unless the sleep mode function is activated.
Auto
The display backlight will light when any of the control panel keys are touched
on the monitors. The backlight will also light when the monitors are activated
from the 'Standby' or 'Sleep' states.
Off
The display backlight is always off.
When this box is checked the current master volume setting will be stored when
Standby or Sleep modes takes effect.
If the box is not checked then the system will revert to –50dB (default) when the
monitors are reactivated.
TM
software.
Advertisement
Table of Contents
