Preparing Your Espresso Machine; For The First Time - Sunbeam EM7000 Instruction Booklet

Preparing your espresso machine

Heading

for the first time

• Ensure the espresso machine is always
positioned onto a dry, stable bench top.
• Ensure all packaging has been removed
from the espresso machine and the drip
tray with grill is in place.
• Fill the espresso machine with water;
1.Simply lift the lid of the water reservoir at
the top of the espresso machine and using
a jug, fill with fresh cold water or filtered
water.
2.Alternatively slide out the water reservoir
from the back of the espresso machine and
fill with fresh cold water or filtered water.
Then replace the water reservoir, ensuring
it is firmly in place.
• Insert the power cord into a 230-240V AC
power outlet and switch the power on.
• Press the POWER button on the espresso
machine. The POWER button will start
flashing, this indicates that your espresso
machine is on and is heating up.
14
• When the red light on the POWER button
stops flashing and turns to a constant
red light this indicates that the espresso
machine is now at temperature and is in
READY MODE.
• At this point glasses and cups can
be placed on the warming plate for
pre-heating.
• Fit the group handle with either the single
or double filter basket and secure to the
group head on the espresso machine.
• Place a sufficiently large container under
both pour spouts and press the MANUAL
button. Water will start to run through.
Note: As a safety mechanism the espresso
machine is programmed to automatically stop
the water flow after 240mls, therefore you
will need to press the MANUAL button again
to restart the water flow.
• Continue to allow the water to run through
until the water reservoir is empty.