Sunbeam EM7000 Instruction Booklet page 15

Advanced Programming continued
Resetting the Factory Settings
To revert back to the espresso machines
factory settings;
1.Ensure the espresso machine is plugged in
and switch on at the power outlet.
Note: DO NOT press the POWER button on
the espresso machine.
2.PRESS and HOLD DOWN the MANUAL
button.
3.While still holding down the MANUAL
button, briefly PRESS the POWER button
and then release the MANUAL button.
4.4 beeps will sound and the machine will
power on.
Power Saving Mode
After 1 hour of non-use the espresso machine
will automatically switch to power saving
mode. Once the espresso machine is in
power saving mode all the lights on the
buttons will dim. While in power saving mode
the espresso machine powers down to 75%
of power. After a further 4 hours of non-use
the espresso machine will beep once and
then turn off.
The time of inactivity before the espresso
machine enters into power saving mode can
be adjusted if so desired;
1.Ensure the espresso machine is plugged in
and switch on at the power outlet.
Note: DO NOT press the POWER button on
the espresso machine.
2.PRESS and HOLD DOWN the MANUAL
and PROGRAM buttons.
3.While still holding down the MANUAL
and PROGRAM buttons briefly PRESS the
POWER button and then release both the
MANUAL and PROGRAM buttons.
To indicate you have activated the
programmability of the power saving mode, a
light on one of the buttons will illuminate;
1 CUP = Power down after 1 hour of
inactivity and then turn off after a further
4 hours of inactivity (Factory setting)
2 CUP = Turn off after 26 hours of
inactivity
PROGRAM = Does not turn off
MANUAL = Turn off after 8 hours of
inactivity
POWER = Turn off after 30minutes of
inactivity
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The espresso
machine will then power on.
4.PRESS and RELEASE one of the buttons
below depending on the power saving mode
desired;
26 hours = PRESS the 2 CUP button
Does not turn off = PRESS the PROGRAM
button
8 hours = PRESS the MANUAL button
30 minutes = PRESS the POWER button
When the new power saving mode setting has
been selected the espresso machine will beep
twice.
5.The espresso machine will then
automatically power on.
Figure 7
13