Sunbeam EM7000 Instruction Booklet page 14

Advanced Programming continued
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The espresso
machine will then power on.
-10ºC -5ºC
4.PRESS and RELEASE one of the buttons
below depending on the required
temperature adjustment;
+5°C = PRESS the 2 CUP button
+10°C = PRESS the PROGRAM button
-5°C = PRESS the MANUAL button
-10°C = PRESS the POWER button
When the new temperature setting has been
selected the espresso machine will beep
twice.
5.The espresso machine will then
automatically power on.
Steam Pump Rate
The steam pump rate of this espresso has
been set at 0.3 seconds on and 0.5 seconds
off. Modifying the steam pump rate enables
you to make the steam wetter or dryer and
aids in the delivery of a powerful, constant,
dry steam – ideal for texturing milk. The
steam pump rate (off time) can be modified
in increments of plus or minus 0.1 seconds
should it be desired.
1.Ensure the espresso machine is plugged in
and switch on at the power outlet.
Note: DO NOT press the POWER button on
the espresso machine.
2.PRESS and hold down the PROGRAM
button.
3.While still holding down the PROGRAM
button briefly PRESS the POWER button
and then release the PROGRAM button.
12
Factory
+5ºC +10ºC
Setting
To indicate you have activated the
programmability of the steam pump rate, a
light on one of the buttons will illuminate;
1 CUP = Factory setting
2 CUP = -0.1 sec off
PROGRAM = -0.2 sec off
MANUAL = +0.1 sec off
POWER = +0.2 sec off
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The espresso
machine will then power on.
+0.2 sec +0.1 sec
off off
4.PRESS and RELEASE one of the buttons
below depending on the required
temperature adjustment;
-0.1 sec = PRESS the 2 CUP button
(delivers a wet steam)
-0.2 sec = PRESS the PROGRAM button
(delivers a wetter steam)
+0.1 sec = PRESS the MANUAL button
(delivers a dry steam)
+0.2 sec = PRESS the POWER button
(delivers a dryer steam)
When the new pump rate setting has been
selected the espresso machine will beep
twice.
5.The espresso machine will then
automatically power on.
Factory -0.1 sec -0.2 sec
Setting off off