Sunbeam EM7000 Instruction Booklet page 13

Advanced Programming continued
Espresso Thermoblock Temperature
The water temperature of the espresso
machine has been calibrated to the precise
temperature of 92°C at the group head.
However the coffee maker can adjust the
temperature of the water at the group head
in increments of 2°C up and down, should it
be desired.
1.Ensure the espresso machine is plugged in
and switch on at the power outlet.
Note: DO NOT press the POWER button on
the espresso machine.
2.PRESS and hold down the 1 CUP button.
3.While still holding down the 1 CUP button
briefly PRESS the POWER button and then
release the 1 CUP button.
To indicate you have activated the
programmability of the espresso thermoblock
temperature, a light on one of the buttons
will illuminate;
1 CUP = Factory setting
2 CUP = +2°C
PROGRAM = +4°C
MANUAL = -2°C
POWER = -4°C
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The espresso
machine will then power on.
-4ºC -2ºC
Factory
+2ºC +4ºC
Setting
4.PRESS and RELEASE one of the buttons
below depending on the required
temperature adjustment;
+2°C = PRESS the 2 CUP button
+4°C = PRESS the PROGRAM button
-2°C = PRESS the MANUAL button
-4°C = PRESS the POWER button
When the new temperature setting has been
selected the espresso machine will beep
twice.
5.The espresso machine will then
automatically power on.
Steam Thermoblock Temperature
The steam temperature of this espresso
machine has been calibrated to deliver a
powerful, constant supply of dry steam for
texturing milk. The temperature of the steam
can be modified in increments. of 5°C up
and down should it be desired.
1.Ensure the espresso machine is plugged in
and switch on at the power outlet.
Note: DO NOT press the POWER button on
the espresso machine.
2.PRESS and hold down the 2 CUP button.
3.While still holding down the 2 CUP button
briefly PRESS the POWER button and then
release the 2 CUP button.
To indicate you have activated the
programmability of the steam thermoblock
temperature, a light on one of the buttons
will illuminate;
1 CUP = Factory setting
2 CUP = +5°C
PROGRAM = +10°C
MANUAL = -5°C
POWER = -10°C
11