Sunbeam EM7000 Instruction Booklet page 10

Using your espresso machine continued
2 Cup Espresso Pour
The 2 CUP function removes the guess
work and is programmed to pour 60mls of
espresso.
Tip: We recommend using the 2 CUP basket
when using the programmed 2 CUP function.
To use this operation press the 2 CUP button
once to start the espresso pour. The pour
will start with the pre-infusion and then the
espresso pour will follow.
The espresso pour will stop after the 2 CUP
volume has been extracted.
Note: When using the 2 CUP function, the
lights on the MANUAL and 1 CUP buttons
will go off and the lights on the POWER and
2 CUP buttons will remain on.
Figure 3
Note: When using the 2 CUP function the
coffee maker can stop the espresso pour at
any time by pressing the MANUAL, 1 or 2
CUP buttons.
8
Steam
To activate the steam, turn the steam dial
to the ON position. This will open the steam
function with an instant and constant supply
of powerful steam for texturing milk.
To turn the steam off, turn the steam dial to
the OFF position.
Tip: To ensure optimum steam performance
we recommend that at the end of texturing
milk, the coffee maker wipes the tip of the
steam wand clean of any milk residue.
Hot Water
To activate the hot water function, turn the
hot water dial to the ON position. This will
dispense an instant flow of hot water.
Tip: This feature is ideal for pre-warming
cups/glasses or for making a Long Black.
Figure 4
Figure 5