Apple Ios - Socket CHS 7Ci Quick Start Manual

APPLE IOS

HID (KEYBOARD) MODE
To pair the CHS with the Apple device: (required only the first time you connect)
1. Power on the CHS.
2. Make sure the CHS is set to HID Keyboard mode (default). If needed, scan this barcode
to set it to the correct mode. The CHS will beep 3 times.
3. Enable Bluetooth on the Apple device. A Bluetooth device search will begin.
4. In the list of found devices, select Socket CHS [xxxxxx]. If prompted, tap Pair.
The characters in brackets are the last 6 characters of the Bluetooth Address, which
is labeled in the CHS battery compartment.
5. After the CHS connects and is ready to scan barcodes, it will beep once.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
To access the onscreen keyboard while connected to the CHS:
See a video demo at:
1. Make sure the CHS is connected to your Apple device.
2. Open your application and place the cursor where you want to enter data.
3. Quickly double-press the power button of the CHS (like double-clicking a mouse) to
open or close the onscreen keyboard.
http://www.youtube.com/socketmobile#p/u/5/VhtttoC6ROs

6