Apple Ios - Socket CHS 7Ci Quick Start Manual

Apple iOS

The CHS versions compatible with Apple iOS mode (equivalent to SPP mode) are
the 7Ci, 7Di(Rx), and 7Xi(Rx). In iOS mode, the CHS can only scan barcodes into
applications developed with SocketScan 10 SDK.
Developers: Learn about the SDK at:
To download the SDK, first register in our Developer Program at
o
http://www.socketmobile.com/support/developer/Register/. Afterwards,
purchase a program subscription at
(SKU# SW1250-1463, $19.95/year)
An optional SDK Support and CHS 7Ci scanner bundle (SKU# SW1251-1464) is
o
available at
End Users: To learn about compatible applications on the Apple App Store™ online store:
View a listing of selected apps at:
o
Contact your enterprise solution provider, who can also help install and set up
o
your iOS compatible application.
To pair and connect the CHS and Apple device: (required only the first time you connect)
The correct Bluetooth connection procedure may vary depending on which application
you are using. Please refer to your application documentation for more information.
Internet access may be required.
1. Power on the CHS. Scan this barcode to change the CHS to iOS mode. The CHS will beep
3 times.
2. Enable Bluetooth on the Apple device. A Bluetooth device search will begin.
In the list of found devices, select Socket CHS [xxxxxx]. If prompted, tap Pair.
3.
4. After they pair and connect, the CHS will beep once to confirm the connection. Now
whenever you power on the CHS, it will automatically try to connect to your device.
Now you are ready to scan barcodes into an application created with the
SocketScan 10 SDK. See scanning instructions on page 4.
To connect to a new computer / device, you must first unpair the CHS. See page 4.
iOS Mode
http://developer.socketmobile.com
http://www.socketstore.com
http://www.socketstore.com
http://www.socketmobile.com/appstore
Print page to scan.
Do not scan
6