Property Ksktscanpropidsecuritymodedevice - Socket ScanAPI Reference Manual

Socket ScanAPI Reference
NOTE: For the 7 series v3.1, ScanAPI uses the friendly name memory to store
the preamble and the postamble. The total amount of characters for the
friendly name, preamble and postamble cannot be bigger than 28 characters.
If a friendly name is too long to be stored along with the preamble and
postamble, an error ESKT_INVALIDPARAMETER would be generated in the
return of the SktScanSet API.
This remark doesn't apply for the 7 series v3.2 or 7x series.
Property type
Get
None
Version
ScanAPI Interface Version

14.12 Property kSktScanPropIdSecurityModeDevice

This property gets or set the security mode of a device.
The security mode can be one of the following values:
Value
kSktScanSecurityModeNone
kSktScanSecurityModeAuthentication
kSktScanSecurityModeAuthenticationEncryption
kSktScanSecurityModeAuthenticationEncryptionSingleBDAddress Same as above
© 2013 Socket Mobile, Inc.
Get Complete
String
Set
String
1.0.0 or higher
Set Complete
None
Description
No security
mode on the
device.
Mode
Authentication
on the device.
Any host
attempting to
connect to this
device will be
asked for a PIN
code
Same as above
but with data
encryption
enabled
between the
host and the
device.
but the device
only keeps the
security
95/152