Property Ksktscanpropidtriggerdevice - Socket ScanAPI Reference Manual

Socket ScanAPI Reference
kSktScanSymbologyDirectPartMarking
kSktScanSymbologyLastSymbologyID
The enumeration of the available symbologiwa of a device can be done by doing get
operations with the symbology ID incremented one by one from
kSktScanSymbologyNotSpecified+1 to kSktScanSymbologyLastSymbolID-1. For
more information please see section 16.
C/C++:
The Symbology ID and Symbology status defines can be found in SktScanTypes.h
file.
Java:
The Symbology ID and Symbology status defines can be found in:
com.SocketMobile.ScanAPI.ISktScanSymbology.id and
com.SocketMobile.ScanAPI.ISktScanSymbology.status
C#:
The Symbology ID and Symbology status defines can be found in:
ScanAPI.ISktScanSymbology.id and ScanAPI.ISktScanSymbology.status.
Objective C:
The Symbology ID and Symbology status defines can be found in SktScanTypes.h
file.
Property type
Get
Symbology
Version
ScanAPI Interface Version
See also:
11.6.2 Decoded Data Event

14.5 Property kSktScanPropIdTriggerDevice

This property allows the application to start or stop a trigger operation of a device
remotely or to activate/deactivate the device trigger button. This property can only
be used in a Set operation. Its Byte value can have one of the following values:
Name
kSktScanTriggerStart
kSktScanTriggerStop
kSktScanTriggerEnable
kSktScanTriggerDisable
© 2013 Socket Mobile, Inc.
Get Complete
Symbology
Direct Part Marking optimization
Last symbology ID, this is not an actual
symbology.
Set
Symbology
1.0.0 or higher
Description
Start a scan
Stop a scan
Enable the trigger button
Disable the trigger button
Set Complete
None
87/152