Socket ScanAPI Reference Manual page 100

Socket ScanAPI Reference
kSktScanSoundFrequencyLow
kSktScanSoundFrequencyMedium
kSktScanSoundFrequencyHigh
The duration and the pause are expressed in milliseconds. The minimum values are
160ms for duration and 100ms for pause.
The sound configuration is summarized in the following table:
Name
Sound Action
Number of Tones
Frequency Tone 1
Duration Tone 1
Pause Tone 1
... same 3 last fields
for the subsequent
tones until Number
of Tone is reached
The Get request property uses only a byte value to request the configuration of a
particular sound action.
The following is an example of an array that can be used for the Set request:
Word Values
kSktScanSoundActionTypeGoodScanLocal Configuration for the Good Scan Local
© 2013 Socket Mobile, Inc.
Size
2 bytes
2 bytes
2 bytes
2 bytes
2 bytes
Low frequency sound
Medium frequency sound
High frequency sound
Present
Get Complete, Set
Get Complete, Set
Get Complete, Set
Get Complete, Set
Get Complete, Set
Description
Description
Configuration of a
particular sound
action.
Define the number
of tones present in
this configuration.
The maximum
number of tones is
five (5).
Define the
frequency of the
first tone.
Define the duration
of the first tone.
The duration range
is 50 (0x32) to
32767 (0x7FFF)
Define the pause
length of the first
tone. The pause
range is from 50
(0x32) to 32767
(0x7FFF)
100/152