Property Ksktscanpropidbatteryleveldevice - Socket ScanAPI Reference Manual

Socket ScanAPI Reference
A flag indicating a good scan cannot be mixed with a flag indicating a bad scan
otherwise an error ESKT_INVALID_PARAMETER (-18) will be generated. By
example kSktScanDataConfirmationRumbleBad cannot be used in conjunction with
kSktScanDataConfirmationBeepGood and kSktScanDataConfirmationLedGreen. A
"none" flag can be in either case.
C/C++:
The helper macro and the constant definitions can be found in the SktScanPropIds.h
file.
Java:
The helper macro can be found in com.SocketMobile.ScanAPI.SktScan.helper.
The constant definition can be found in
Com.SocketMobile.ScanAPI.ISktScanProperty.values.dataConfirmation
C#:
The helper macro can be found in ScanAPI.SktScan.helper.
The constant definition can be found in
ScanAPI.ISktScanProperty.values.dataConfirmation
Objective C:
The helper macro and the constant definitions can be found in the SktScanPropIds.h
file.
Parameter type
Get
Not applicable
Version
ScanAPI Interface Version

14.22 Property kSktScanPropIdBatteryLevelDevice

This property retrieves the battery level of a connected device.
The battery level is described in a Uloong.
The various battery information contained in this Ulong can be retrieved using a set
of macros that are defined in the paragraph11.6.5 Battery Level Event.
Parameter type
Get
None
Version
© 2013 Socket Mobile, Inc.
Get Complete
Not applicable
Get Complete
Ulong
Set
Ulong
1.0.0 or higher
Set
Not applicable
Set Complete
None
Set Complete
Not applicable
106/152