Property Ksktscanpropidconnectionbeepconfigdevice - Socket ScanAPI Reference Manual

Socket ScanAPI Reference
The helper macro and the constant definition can be found in the SktScanPropIds.h
file.
NOTE:
This feature is only available in the 7x series, an ESKT_NOTSUPPORTED error is
returned for the other series.
Parameter type
Get
None
Version
ScanAPI Interface Version

14.34 Property kSktScanPropIdConnectionBeepConfigDevice

This property configures or retrieves the current configuration on how the scanner
beeps when it connects to a host.
The scanner can automatically beep when it forms a SPP connection to the host. By
default the scanner doesn't beep when it connects to a host in SPP mode, and
instead ScanAPI will send a data confirmation to the scanner to make it beep.
If the scanner is used without ScanAPI in SPP mode, the connection beep can be
configured using this property so the scanner beeps each time it connects.
This property value is a byte and here is a table that summarizes the 2 possible
values used with this property:
Name
kSktScanConnectBeepConfigNoBeep 0x00
kSktScanConnectBeepConfigBeep
C/C++:
The helper macro and the constant definition can be found in the SktScanPropIds.h
file.
Java:
© 2013 Socket Mobile, Inc.
Get Complete
Byte
Value Description
0x01
Set
Byte
1.0.0 or higher
The scanner won't automatically
beep when it connects to the host,
ScanAPI if used, will make the
scanner beep.
The scanner automatically beeps
when it forms a SPP connection to a
host.
Set Complete
None
120/152