Regulatory Compliance - Socket Secure Digital Scan Card Series 3 User Manual

The Socket SD Scan Card is designed to be compliant with the rules and regulations
in locations where they are sold and will be labeled as required. This product is type
approved users are not required to obtain license or authorization before using.
Radio Frequency Interference Requirements
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment is also EN55024:1998 and C-Tick compliant. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his or her own expense.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user may try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna of the radio or television.
•
Increase the distance separating the equipment and the receiver.
•
Connect the equipment to an outlet on a different branch circuit than that of
the receiver.
•
Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet helpful: How to Identify and Resolve Radio-
TV Interference Problems. This booklet is available from the U.S. Government
Printing Office, Washington, D.C. 20402.
Product Disposal
This product must not be disposed of with municipal waste. It is your responsibility
to dispose of your waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment.
Laser Device — SDSC 3E2
The SD Scan Card 3E2 version of this product described in this User Guide contains a
Symbol SE-955 Class 1 laser scan engine, for which the following applies:
36
R C
EGULATORY OMPLIANCE