Socket Secure Digital Scan Card Series 3 User Manual page 30

S S
YMBOLOGY ELECTOR
1. In the main screen of SocketScan, make sure the SDSC scanner is enabled and tap
Symbologies.
2. Use the checkboxes to select which symbologies you would like the scanner to
decode. Tap OK.
Note: Enabling all possible symbologies will make the decode process slightly
longer.
S T
CAN EST
1. In the main screen of SocketScan, make sure the SD Scan Card is enabled and tap
Test.
2. Tap Scan to trigger the scanner and scan a barcode.
Note: You cannot use the hardware trigger button for the scan test. Use the Scan
button to trigger the scanner.
3. SocketScan will report the encoded data, as well as its symbology type and
length. To view the data in hexadecimal format, check View as Hex.
4. When done, tap OK to exit the Test Scan.
H F
ELP ILES
When SocketScan is open, access help files by tapping on the
upper right corner.
V I
ERSION NFORMATION
1. In the main screen of SocketScan, tap on the Options button or tap on the upper
left corner of the screen to access the Options menu.
2. In the Options menu, tap About SocketScan.
3. View the software version information, then tap OK.
30
symbol in the