F
T
LOATING
RIGGER
If you find it inconvenient or impossible to assign or use a hardware button to
trigger the scanner, you can install this virtual trigger button that "floats" on top of
the active application.
1. Make sure to do all of the following before using SocketScan Trigger:
• If you are not using the SoMo, install SocketScan Trigger from the installation
CD. The software must be installed separately from SocketScan.
• Start SocketScan. Tap Start | Programs | SocketScan.
• Insert the SD Scan Card into your Pocket PC.
• Open the application that you want to scan data into.
2. Tap Start | Programs | SocketScan Trigger.
3. The floating trigger button will appear on your screen on top of the active
application.
Drag from the title bar to move the trigger button to a convenient place on the
screen.
Tap the trigger button to activate the scanner.
C
3: S
S
HAPTER
OCKET
CAN FOR
W
M
INDOWS
OBILE
15
Need help?
Do you have a question about the Secure Digital Scan Card Series 3 and is the answer not in the manual?