Step 2: Start Socket Scan; Step 3: Insert The Card - Socket Secure Digital Scan Card Series 3 User Manual

STEP 2: S S
TART
1. Tap Start | Programs | SocketScan folder | SocketScan.
Note: Alternatively, you can press the trigger button to start the program.
2. When SocketScan is running, a SocketScan icon will appear at the bottom of the
Today screen.
Icon Meaning
SD Scan Card detected. SocketScan is ready for barcode scanning.
No scanner detected. The scanner is either missing or improperly inserted.
STEP 3: I
NSERT THE
1. Open the card slot cover on top of the SoMo and insert the SD Scan Card into the
SD card slot.
Be sure to insert the card all the way into the slot.
Do not insert the card backwards.
Do not push the card in too hard, or you can damage the card or the card slot of
the SoMo.
Note: To remove the SD Scan Card, push it completely into the slot. After the card springs
back, you can safely remove the card. Do not pull the card out without pushing first, or
you can damage the connector the next time you insert a card.
2. Make sure the SocketScan icon changes to indicate that the scanner is detected.
10
S
OCKET CAN
C
ARD