Step 6: Open Your Application; Step 7: Scan Data Into Your Application - Socket CompactFlash Scan Card Series 5 User Manual

Note: If the "No scanner detected" icon appears, make sure that the CF Scan Card is
pushed all the way into the slot.
STEP 6: O Y A
PEN OUR
Start the application that you want to scan data into. Make sure a document or
spreadsheet is open. Place the cursor where you would like data from the next scan to
go.
STEP 7: S D
CAN ATA INTO
Press the trigger button and scan the barcode. Make sure the red beam covers the entire
width of the barcode.
IMPORTANT!
Do not look directly into the beam or point it at a person!
Note: If you have trouble scanning, try adjusting the scanning distance and/or the
scanning angle. Please refer to Appendix C and Appendix E for more information.
Note: For the CF Scan Card 5C, 5X or 5XRx, try to keep the scanner steady as it scans.
When data is read, a beep should sound, and the scanner beam should turn off,
indicating a good read. Scanned data will appear in the document, and the cursor will
automatically advance to the next line, ready for the next scan.
If the CF Scan Card fails to read data within a few seconds, the scanner beam will turn off
and you must try again.
C 3: S S
HAPTER OCKET CAN FOR
PPLICATION
Y A
OUR PPLICATION
W M
INDOWS OBILE
31