Table of Contents
Advertisement
Quick Links
Introducing the 1394 PCI Adapter
The 1394 PCI Adapter is designed to add FireWire
(1394a) interface to your PC computer for easy connection
to DV camcorders, hard disk drives (self-powered),
scanners, printers and other 1394 devices.
Features and Benefits
•
Compliant with IEEE 1394-1995, 1394a-2000 and
1394 OHCI 1.1 standards
•
PCI 2.2 compliant and works in 32-/64-bit, 3.3V or
5V PCI slots
•
Provides three high-speed FireWire ports for
connecting up to 63 devices
•
Supports both asynchronous and isochronous data
transfer modes
•
Supports serial bus data transfer rates of 100, 200,
and 400 Mbps
System Requirements
•
Pentium
slot
•
Windows
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) /
2000 / ME / 98SE
04-0224F
1394 PCI Adapter
Quick Installation Guide
II or equivalent PC with an available PCI
®
7 (32-/64-bit) / Vista (32-/64-bit) / XP
®
1
Advertisement
Table of Contents
Related Manuals for SIIG 1394 PCI Adapter
Summary of Contents for SIIG 1394 PCI Adapter
-
Page 1: Quick Installation Guide
1394 PCI Adapter Quick Installation Guide Introducing the 1394 PCI Adapter The 1394 PCI Adapter is designed to add FireWire (1394a) interface to your PC computer for easy connection to DV camcorders, hard disk drives (self-powered), scanners, printers and other 1394 devices. -
Page 2: Hardware Installation
Package Contents • 1394 PCI Adapter • Quick Installation Guide Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. -
Page 3: Driver Installation
Windows 7 / Vista / XP / Server 2003 & 2008 / 2000 Windows 7, Vista, XP, Server 2003 & 2008 and 2000 will automatically detect and install the correct driver for the 1394 PCI adapter. No additional driver installation is needed. Windows ME... - Page 4 To Verify Windows Installation Check Device Manager to verify successful driver installation. For Windows 7 / Vista / XP / Server 2003 & 2008 / 2000 Right click Computer or My Computer, then click Manage. Click Device Manager. For Windows Server 2008 Right click Computer, click Manage, double click Diagnostics.
- Page 5 Blank Page...
- Page 6 Blank Page...
-
Page 7: Technical Support And Warranty
• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton. - Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 1394 PCI Adapter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other contries.