Conventions - Sierra Wireless UMTS Command Reference Manual

Supported AT Command Reference
Table 1-4: Memory management commands
Cmnd
!NVBACKUP
Cmnd
!ICCID
12
Pg
59 Backs up items stored in non-volatile memory
SIM Commands
communicate with an installed (U)SIM.
Table 1-5: SIM commands
Pg
61 Returns (U)SIM card's ICCID

Conventions

The following format conventions are used in this reference:
Character codes or keystrokes that are described with words or
standard abbreviations are shown within angle brackets using
a different font, such as
for a blank space character.
Numeric values are decimal unless prefixed as noted below.
Hexadecimal values are shown with a prefix of 0x, i.e. in the
form 0x3D.
Binary values are shown with a prefix of 0b, i.e. in the form
0b00111101.
Command and register syntax is noted using an alternate font:
!CHAN=<c>[,b]
included before all commands except as noted in the reference
tables.
Characters that are required are shown in uppercase; param‐
eters are noted in lowercase. Required parameters are
enclosed in angle brackets (
enclosed within square brackets (
be included in the command string.
Commands are presented in table format. Each chapter covers
the commands related to that subject and presents a summary
table to help you locate a needed command. Commands are in
ASCII alphabetical order in the body of each chapter.
Any default settings are noted in the command tables. Note
that these are the factory default settings and not the default
parameter value assumed if no parameter is specified.
Description
This chapter describes commands that
Description
<CR>
for Carriage Return and
AT
. The " " characters are not shown but must be
<n>
) while optional parameters are
[x]
). The brackets are not to
Supporting
modems
All
Supporting
modems
All
<space>
2130617