Document Structure - Sierra Wireless UMTS Command Reference Manual

Table 1-1: Modem status and reset commands
Cmnd
!BAND
!BCINF
!BOOTHOLD
^CARDMODE
+CLVL
+CMUT
!CNTI
+CQI
!CSDONSIO2
+ECIO
!GETBAND
Rev 2.4 Jan.08
Upgrading
If your modem firmware is an earlier version, you can acquire
updated firmware by contacting your account manager.

Document structure

This document assumes you have the 3GPP TS 27.007 AT
command documentation (see page 7). This reference includes
a chapter covering
the proprietary commands listed in the tables below. Each
table corresponds to one chapter in this guide.
Note: The 'Supporting modems' column indicates which Mini Card
embedded module (MC) and AirCard modem (AC) models support
each command. If an entry is marked with an asterisk ('*'), a firmware
upgrade may be required. See the detailed command entry for details.
Modem Status, Customization, and Reset Commands
chapter describes commands used to determine modem status,
adjust customization settings, and reset the modem.
Pg
27 Selects a set of frequency bands / queries current
selection
28 Returns the bootloader version
28 Resets modem and waits in bootloader for firmware
download
28 Returns SIM card mode (card type)
29 Sets / returns internal loudspeaker volume
29 Enables / disables uplink voice muting
29 Returns current, available, and supported network
technologies
30 Returns or enables / disables return of averaged CQI
(Channel Quality Indicator) value (WCDMA only)
30 Configures secondary SIO port for circuit-switched data
31 Returns total Energy per chip per power density value
(WCDMA only)
31 Returns the current active band
Supported 27.007 AT commands
Description
About this Guide
, as well as
This
Supporting
modems
All
All
All
All*
All*
All
All
All*
All*
All*
All
9