Table of Contents
Advertisement
38
System rack installation
Important! Do not attempt the procedures described in the
following sections unless you are a qualified service technician.
Preparing the server
1
Screw the front mounting brackets (left and right) to the server
with the eight screws.
2
Mount the two support plates between the left and right
telescopic bars with the eight screws .
3
Align the telescopic bars with the two support plates to the front
mounting brackets attached to the server.
4
Secure the telescopic bars to the front mounting brackets with the
six screws. For more information on this steps, refer to page 39.
Appendix A — System rack installation
Advertisement
Table of Contents
