Table of Contents
Advertisement
24
Server power status
Power status.
Server is
switched off
Server is
switched on
Server in
suspend mode
Other ON/OFF possibilities
In addition to the power button, the server can be switched on and off
in the following ways:
•
Specified switch-on time/switch-off time
The server is switched on or off at a time specified in the BIOS
Setup menu.
•
Ring indicator
The server is switched on via an internal or external modem.
•
Wakeup On LAN (WOL)
The server is switched on by a command via the LAN.
•
After power failure
The server automatically switches on following a power failure
(depending of the settings in the BIOS).
•
Intelligent Platform Management Interface (IPMI)
The server is switched on by an IPMI console via COM1 or RJ-45.
Description
The power indicator color is solid amber.
The power indicator color is solid green.
To shut down the server, press the power button and/
or send a corresponding controlling signal (refer to
the next section on "Other ON/OFF possibilities").
The power indicator color is flashing green.
System fans speed slows down based on IPMI setting
and all RGB displays are shut down.
To resume normal operation, press any button.
2 System setup
Advertisement
Table of Contents
