Connecting The Server Cables; Connecting The Monitor - AOpen Fortress 1120 User Manual

Connecting the server cables

Cable connection guideline
1 Be sure to read the documentation for all peripheral devices
before connecting them.
2 Do not connect or disconnect data cables during a thunderstorm.
3 When removing a cable, always hold it by the plug.
4 Connect and disconnect the cables in the order described below.
To connect cables
1 Turn off all power and equipment switches.
2 Pull all power plugs out of grounded power sockets.
3 Plug all cables into the server and peripherals. Secure the data
transmission cable connections (e. g. nut retention).
4 Plug all data communication cables into the utility sockets.
5 Plug all power cables into the grounded power sockets.
To disconnect cables
1 Turn off all power and equipment switches.
2 Pull all power plugs out of grounded power sockets.
3 Unplug all data communication cables from the utility sockets.
4 Loosen the nut retentions on the connector housings and pull the
corresponding cables out from the server and from the
peripherals.

Connecting the monitor

1 Plug the data cable of the monitor into the monitor port.
For the location of the monitor port, refer to page 9.
21