Adjusting Display Color (Red, Green, Blue); Adjusting Osd Menu Parameters (Osd Position And Timer) - AMX PTM-D15 Platinum Series Instruction Manual

FIG. 19 Selecting the Picture Color Temperature
4. Exit the OSD by using the Save/Exit Icon (

Adjusting Display Color (Red, Green, Blue)

The Red, Green, and Blue color settings allow you to fine tune the picture color.
1. Press the Menu button (
2. Press the DOWN button to highlight the Next Page icon (
button. The Color Adjust menu appears.
FIG. 20 Color Adjust menu
3. Press the UP button to highlight the Color icon (
to confirm your selection. The Red, Blue, and Green Color slide bars appear in the center of
the menu.
4. Press the UP or DOWN buttons to highlight the Red, Blue or Green color bar and press
INCREASE or DECREASE to adjust the color balance up or down.
FIG. 21 Sample selecting the Picture Color Temperature
5. Exit the OSD by using the Save/Exit Icon (

Adjusting OSD Menu Parameters (OSD Position and Timer)

OSD Menu Parameters allow you to change the OSD menu position and the delay time before the
OSD menu disappears.
1. Press the Menu button (
2. Press the DOWN button to highlight the Next Page icon (
button. The second menu appears.
3. Press the UP button to highlight the Next Page icon (
The third menu appears.
PTM-D15 15" Platinum Touch Panel
).
) to activate the OSD menu.
), and press INCREASE or DECREASE
).
) to activate the OSD menu.
On Screen Display (OSD) Features
), then press the DECREASE
), then press the DECREASE
), then press the DECREASE button.
29