Sending An Ir File - AMX IREdit Operation/Reference Manual

Communications and File Transfers
Virtual NetLinx Master Settings dialog Options
VNM System Number
OK
Cancel

Sending an IR File

1.
Select an IR File in the Navigator window (FIG. 55):
FIG. 55 IR FIle selected in the Navigator window
2.
Select Tools > Send or click the toolbar button. This action prompts IREdit to make the device
connection specified in the Communications Settings dialog (FIG. 56).
FIG. 56 Connecting dialog
3.
Once the connection has been established, the Send IR dialog is opened (FIG. 57):
FIG. 57 Send IR dialog
40
Set the system number to a value between 1 and 65535.
Click to save changes and close this dialog.
Click to discard changes and close this dialog.
If this message is not displayed,
review your connection settings.
IREdit IR Library Management