Modem Port Settings Dialog; Virtual Netlinx Master Settings Dialog - AMX IREdit Operation/Reference Manual

Serial Port Settings dialog Options (Cont.)
OK
Cancel

Modem Port Settings dialog

With Modem selected as the Transport Connection Option, click Settings in the Communications Settings
dialog to open the Modem Port Settings dialog (FIG. 53):
FIG. 53 Modem Port Settings dialog
Modem Port Settings dialog Options
Com Port
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Phone Number Enter the phone number to be dialed for connection.
OK
Cancel

Virtual NetLinx Master Settings dialog

With Virtual NetLinx Master selected as the Transport Connection Option, click Settings in the
Communications Settings dialog to open the Virtual NetLinx Master Settings dialog (FIG. 53):
FIG. 54 Virtual NetLinx Master Settings dialog
IREdit IR Library Management
Click to save changes and close this dialog.
Click to discard changes and close this dialog.
Click the down arrow to open a menu where you can choose between available COM ports.
Click the down arrow to open a menu where you can choose the baud rate of your COM port
from the list (suggested setting = 38400).
Click the down arrow to open a menu where you can choose the Data Bits
(suggested setting = 8).
Click the down arrow to open a menu where you can choose the parity
(suggested setting = none).
Click the down arrow to open a menu where you can choose the Stop bit(s)
(suggested setting = 1).
Click the down arrow to open a menu where you can choose the Flow Control
(suggested setting = none).
Click to save changes and close this dialog.
Click to discard changes and close this dialog.
Communications and File Transfers
39