Programming An Axc-Ir/S Card - AMX IRLIB Instruction Manual

Note
Make sure that ***MASTER
PRESENT*** is displayed on
the IRLIBX screen.
Figure 26
Enter Device Number window
Figure 27
Sending Device Function win-
dow
IRLIB Infrared Library Management Program
• Add or delete any new functions to the file as needed. Save the file as de-
scribed in the Saving a Custom File subsection. The functions listed in the cus-
tom file do not contain manufacturing or hand control information.
Programming an AXC–IR/S card
Now that you have completed your list of Hand Control functions, you can send
them to be programmed into an Panja IR device through the Central Controller item.
Highlight the PROGRAM option in the menu, and press ENTER or RETURN. If you
are connected to a Central Controller, the "Enter Device Number" message window
(Figure 26) appears.
Programming first clears the device memory, then sends the functions to the device
according to the selection list you made. Figure 27 shows the device function window
as it is downloading the function operations to your AXC-IR/S card. Observe the
windows and messages that appear during the storage process. Repeat the steps if
there are any problems.
Application and Use 27