Table of Contents
Advertisement
Identify Dialog Options
Manufacturer
Category
Model
Hand Control
Function
Channel
Hits
Click on any of the column heading to arrange the fields in either ascending or descending order
The captured function will display in green. Hand controls that have at least one hit but did not match in the
current capture will display in blue.
Using Identify
The Identify feature allows functions to be identified from a list of hand controls. An IRIS connected to the
serial port is necessary in order to utilize this feature.
1.
Perform a search in the Search window (see FIG. 13 on page 11).
2.
Within the Search Results window, under the Identify column, click on the functions to be added to the
Identify list (FIG. 27):
FIG. 27
Search Results window
3.
After all desired functions have been selected, select Tools > Identify... to open the Identify dialog.
4.
Click on the Capture button to begin the identification session (FIG. 28):
FIG. 28
Identify dialog - Capture and remove Not Hit buttons
5.
Begin sending functions to IREdit via the IRIS.
IREdit IR Library Management
The name of the function's matching manufacturers.
The categories for the matching functions.
The model names for the matching functions.
The name of the matching hand control.
The function description for the matching function.
The corresponding channel for the matching function.
The number of times the function has made a match.
Capture - This button initiates the Identify session and readies the IRIS to receive functions.
Remove No Hit - This button will remove all rows that currently contain zero hits.
Open - This button will open a selected hand control.
Close - This button closes the Identify dialog.
As the functions are received, found functions will be moved to the top of the list.
The next function captured will increment the number of hits column and display in green.
Hand controls with a minimum of one hit but not found in the current capture will display in blue.
Clicking on the Remove No Hit button will remove all rows that contain no hits.
Select a hand control and click the Open button to open it into the IR Document window.
Basic Operations
19
Advertisement
Table of Contents
