Table of Contents
Advertisement
Figure 5
AXU-CP or AXU-CP/PB and
low-profile back box cutout
dimensions
Color Passive-Matrix LCD Touch Panels
Make a cutout in the surface according to the dimensions shown in Figure 5 for
1.
a low-profile back box.
Insert a flat-blade screwdriver into the release slot on the touch panel' s bezel
2.
and remove the engraved overlay.
Place the touch panel into the cutout and mark the screw insert positions as
3.
shown in Figure 5.
Remove the touch panel and drill four #6-32 insert holes. Then, place a threaded
4.
insert into each hole.
Attach the data and power wiring to the touch panel. (See Wiring the Touch
5.
Panel.)
Installing the Touch Panel
7
Advertisement
Table of Contents
