Table of Contents
Advertisement
Figure 160
Feedback options page
Note
The bar graph uses shading to
indicate control levels and the
slider uses a slider bar.
94
Touch Panel Program Reference
CHANNEL CODE
The channel code range is 1 through 255. Keep track of channel code settings
to create duplicate buttons with identical functions on another page.
LEVEL CODE
Opens the keypad to set the level code for the bar icon. The
level codes 1 through 8 identify the bar icons in the AXCESS software
program. Refer to the AXCESS Programming Guide for more information.
BRING BUTTON TO FRONT
icons. This option s tacks bar icons for complex arrangements.
FEEDBACK
Opens the Feedback options page shown in Figure 160.
BAR GRAPH
The feedback options are BAR GRAPH and SLIDER. Feedback can be sent by the
touch panel or external sources such as the AXCESS Control System or PC.
BAR GRAPH
Sets the bar icon to a bar graph and returns to the Attributes
page. The shaded portion of the bar graph can be set to control a device or
display a status change when the touch panel is connected to an AXCESS
Control System or a PC.
SLIDER Changes the bar icon into a slider and returns to the Attributes
page. The slider bar can be set to control a device or display a status change
when the touch panel is connected to an AXCESS Control System or a PC.
FUNCTION
Opens the display options shown in Figure 161. Choose one of
the options to set the bar icon display.
Opens the keypad to set the channel code for the button.
Sets the alignment position of the two bar
SLIDER
Color Passive-Matrix LCD Touch Panels
Advertisement
Table of Contents
