Table of Contents
Advertisement
Color Passive-Matrix LCD Touch Panels
Insert a flat-blade tool into the release slot on the touch panel' s bezel and
2.
remove the engraved overlay.
Remove the four #6-32 mounting screws and carefully lean the touch panel
3.
backward to expose the connectors.
Disconnect the connectors and remove the touch panel from the back box or
4.
equipment rack.
Flip the touch panel facedown onto a soft cloth and carefully pry the 256K ICs
5.
out of the 32-socket connectors with a non-conducting flat-blade tool and insert
the new 1 MB ICs.
Return the touch panel to the back box or equipment rack and connect the
6.
power and AXlink connectors and insert the four mounting screws and tighten.
Place the engraved overlay onto the touch panel bezel.
7.
Memory Upgrade
133
Advertisement
Table of Contents
