Turning The Eatc On/Off; Automatic Operation; Temperature Selection - Ford 2000 Crown Victoria Owner's Manual

Turning the EATC on
Press AUTOMATIC, any of the
override controls or the fan speed
control. The EATC will only operate
when the vehicle is running.
Turning the EATC off
Press OFF. The Outside
Temperature function will continue
to operate until the ignition is
turned off.

Automatic operation

Press AUTOMATIC and select the desired temperature. The selected
temperature and the word AUTO will appear in the display window. The
EATC system will either heat or cool to achieve the selected
temperature. The system will automatically determine fan speed, airflow
location and if outside air or recirculated air is required. Fan speed
remains automatic unless the fan speed thumbwheel is turned.
When in AUTOMATIC and weather conditions require heat, air will be
sent to the floor. However, if the engine is not warm enough to provide
heat, the fan will be at a low speed and the air will be directed to the
windshield. In 3 1
and the airflow location will change to the floor area.
If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations and the fan control
allows you to adjust fan speed as necessary.

Temperature selection

The display window indicates the
selected temperature, function
(AUTO or one of the override
controls) and manual control of fan
speed ( ) if automatic fan speed is not desired.
⁄ minutes or less, the fan speed will start to increase
2
Controls and features
AUTO
OUTSIDE TEMP
MAX A/C NORM A/C VENT FLOOR
OFF
AUTOMATIC
FLR • DEF DEF
HI
OFF
F
AUTOMATIC
FLR • DEF DEF
LO
HI
LO
F
˚
AUTO
29