Autolamp Delay System; Setting Autolamp - Ford 1999 Explorer Owner's Manual

Controls and features
If the DEL button is inadvertently pressed or the time allotted (5
seconds) has passed, the indicator light will flash amber and an "error"
tone will sound.
AUTOLAMP DELAY SYSTEM (IF EQUIPPED)
The autolamp sets the headlamps to turn on and off automatically. The
autolamp may be set to:
• turn on the lamps automatically at night
• turn off the lamps automatically during daylight
• keep the lamps on for up to three minutes after the key is turned to
OFF

Setting autolamp

1. Make sure the headlamp control
OFF
is in the OFF position. Leaving the
headlamp control on will override
the autolamp.
2. Turn the ignition to the ON
position or start the vehicle.
3. Slide the delay control all the way
to the left.
The further you move the knob to
the right, the longer the headlamps
DELAY
AUTOLAMP
OFF MAX.
stay on after the ignition is turned
to the OFF position. The autolamp
will keep the headlamps on for a maximum of three minutes after the
ignition is turned to OFF.
4. The autolamp automatically turns the lamps on and off. The indicator
light will illuminate when the headlamps turn on.
97