Table of Contents
Advertisement
Lower the memory module into the socket and press firmly using both thumbs until the module snaps
into place.
Repeat step 1, 2 & 3 for the remaining memory modules setting.
＊ The pictures shown above are for reference only. Your
mainboard configuration may vary with the pictures shown.
Back Panel Configur
P
S/2 Mouse & Keyboard
T
his mainboard provides a standard
as
signments are described below:
PS/2 Mouse
PS/2 Keyboard
Serial and Parallel Interface Ports
The mainboard is equipped with one serial port and one parallel
port on the back panel. These interface ports will be explained as
below.
atio
n
Con ectors: JKBMS1
n
PS/2 m se connector an
ou
d P
Pin
Assignment
1
Data
2
No connect
3
Ground
9
S/2 Key
boa
rd connecto
r. The pin
Pin
Assignment
4
+5 V (fused)
5
Clock
6
No connect
Advertisement
Table of Contents
