Onkyo HT-R558 Instruction Manual

Hide thumbs Also See for HT-R558:

Service manual (87 pages)

Table of Contents

Quick Links

Need help?

Do you have a question about the HT-R558 and is the answer not in the manual?

Questions and answers

Summary of Contents for Onkyo HT-R558

Page 1: Table Of Contents
Contents AV RECEIVER Safety Information and Introduction ....2 HT-R558 Table of Contents ...........5 Connections ..........11 Turning On & Basic Operations....19 Instruction Manual Advanced Operations ........39 Controlling Other Components....52 Appendix ............58 Speaker Package...
Page 2: Safety Information And Introduction
Safety Information and Introduction 9. Do not defeat the safety purpose of the polarized or D. If the apparatus does not operate normally by grounding-type plug. A polarized plug has two blades following the operating instructions. Adjust only WARNING: with one wider than the other. A grounding type plug those controls that are covered by the operating TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, has two blades and a third grounding prong.
Page 3: Precautions
Dry the unit immediately afterwards with a as that indicated on the plug. Check for the ASTA mark or this unit, have it checked by your Onkyo dealer. clean cloth. Don’t use abrasive cloths, thinners, the BSI mark on the body of the fuse.
Page 4: Supplied Accessories
• Remove expired batteries as soon as possible to prevent damage from leakage or corrosion. Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
Page 5: Table Of Contents
Using the Audio Settings .......... 49 Turning On & Basic Operations Controlling Other Components Turning On/Off the AV Receiver ........19 iPod/iPhone Playback via Onkyo Dock ....52 Turning On ..............19 Using the Onkyo Dock ..........52 Turning Off ..............19 Controlling Your iPod/iPhone........53 Playback ..............20...
Page 6: Features
Safety Information and Introduction Features Connections • 4 HDMI Inputs and 1 Output Amplifier • Onkyo for System Control • 3 Digital Inputs (2 Optical/1 Coaxial) • 100 Watts/Channel @ 6 ohms (IEC) • Component Video Switching (2 Inputs/1 Output) •...
Page 7: Front & Rear Panels
Safety Information and Introduction Front & Rear Panels Front Panel For detailed information, see the pages in parentheses. TUNING / , PRESET (24), cursor and ENTER buttons ON/STANDBY button (19) RETURN button HDMI THRU indicator (48) MASTER VOLUME control (20) SPEAKERS A and B buttons (35) MUSIC OPTIMIZER button (37, 51) Remote control sensor (4)
Page 8: Display
Safety Information and Introduction Display For detailed information, see the pages in parentheses. A and B speaker indicators (35) M.Opt indicator (37, 51) Listening mode and format indicators (30, 47) Audyssey indicator (27, 45) Dynamic EQ indicator (45) Dynamic Vol indicator (46) Tuning indicators RDS indicator (25) AUTO indicator (24)
Page 9: Rear Panel
Safety Information and Introduction Rear Panel DIGITAL IN COAXIAL and OPTICAL jacks Composite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT IN, COMPONENT VIDEO IN and OUT jacks GAME IN, TV/CD IN) HDMI IN and OUT jacks MONITOR OUT V jack FM ANTENNA jack and AM ANTENNA terminal SUBWOOFER PRE OUT jack...
Page 10: Remote Controller
Receiver mode. RECEIVER). You can also use the remote controller to control Controlling the AV Receiver / buttons (24) Onkyo Blu-ray Disc/DVD player, CD player, and other components. D.TUN button (24) See “Entering Remote Control Codes” for more DISPLAY button details (➔...
Page 11: Connections
Connections Connecting the AV Receiver Surround Surround right left Connecting Your Speakers Connecting the Speaker Cables The following illustration shows how to connect the speakers to each pair of terminals. ■ Push-type speaker terminals Strip 10 to 12 mm of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown (Supplied speaker cables are already stripped).
Page 12 Connections Speaker Configuration Connecting the Speaker Cables The following table indicates the channels you should use The speaker terminals are color-coded for identification depending on the number of speakers that you have. purpose. No matter how many speakers you use, a powered Speaker Color subwoofer is recommended for a really powerful and solid...
Page 13 Connections Speaker Connection Precautions • Don’t connect more than one cable to each speaker Using a Powered Subwoofer terminal. Doing so may damage the AV receiver. Read the following before connecting your speakers: • Don’t connect one speaker to several terminals. •...
Page 14: About Av Connections
Connections ■ AV Cables and Jacks Optical digital audio About AV Connections Optical digital connections allow you to enjoy digital ■ sound such as PCM , Dolby Digital or DTS. The audio HDMI Connecting AV components quality is the same as coaxial. HDMI connections can carry digital video and audio.
Page 15: Connecting Components With Hdmi
Connections Connecting Components with HDMI VCR or DVD recorder/digital video recorder Game console TV, projector, etc. Satellite/cable set-top box, etc. Blu-ray Disc/DVD player ■ If your TV doesn’t support Audio Return Channel (ARC), you See also: Audio Return Channel (ARC) function need to connect an optical digital cable together with the HDMI •...
Page 16: Connecting Your Components
Connections Connecting Your Components Note The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected When USB input is selected, you can input video signals from to other video outputs, use the AV receiver’s display the AUX INPUT VIDEO jack.
Page 17: Connecting Onkyo Components
Connecting a Recording Component Connecting Onkyo Components See “Recording” for details on recording (➔ page 38). Make sure that each Onkyo component is connected with an analog audio cable (connection in the hookup examples) (➔ page 16). Make the connection (see the illustration).
Page 18: Connecting The Antennas
Connections Connecting the Antennas Connecting the Power Cord This section explains how to connect the supplied indoor FM antenna and AM loop antenna. Plug the power cord into an AC wall outlet. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.
Page 19: Turning On & Basic Operations
Turning On & Basic Operations Turning On/Off the AV Turning On Turning Off Receiver ON/STANDBY on the front panel. ON/STANDBY on the front panel. Press Press ON/STANDBY Press RECEIVER followed by on the remote Press RECEIVER followed by on the remote controller.
Page 20: Playback
(➔ page • “Playing a USB Device” (➔ page (➔ page • “Listening to AM/FM Radio” • “iPod/iPhone Playback via Onkyo Dock” (➔ page • “Controlling Other Onkyo Components” (➔ page To adjust the volume, use VOL / . Select a listening mode and enjoy! See also: •...
Page 21: Controlling Contents Of Usb Devices
Press this button repeatedly to cycle through the repeat These buttons navigate through the menus. modes. This button cycles through pages. PLAYLIST • See “Controlling Other Onkyo Components” about the operation In Standard Mode (iPod/iPhone), this button selects Press USB (➔ page 54).
Page 22: Understanding Icons On The Display
Turning On & Basic Operations Understanding Icons on the Display Playing an iPod/iPhone via USB Use / to select a music file, and press ENTER or to start playback. This section describes icons that appear on the AV The on-screen menus appear only on a TV that is receiver’s display during media playback.
Page 23: Playing A Usb Device
Turning On & Basic Operations Playing a USB Device The on-screen menus appear only on a TV that is connected to the HDMI OUT. This section explains how to play music files from a USB device (e.g., USB flash drives and MP3 players). See also: (➔...
Page 24: Listening To Am/Fm Radio
Turning On & Basic Operations ■ Tuning into Radio Stations Manual tuning mode Listening to AM/FM Radio In manual tuning mode, FM stations will be in mono. ■ Auto tuning mode This section describes the procedure using the buttons Press TUNING MODE so that the AUTO indicator on the front panel unless otherwise specified.
Page 25 Turning On & Basic Operations ■ Presetting AM/FM Stations Selecting Presets Using RDS You can store a combination of up to 40 of your favorite To select a preset, use PRESET on the AV AM/FM radio stations as presets. receiver, or the remote controller’s CH +/–. RDS works only in areas where RDS broadcasts are available.
Page 26 Turning On & Basic Operations ■ Listening to Traffic News (TP) RDS program types (PTY) Note Type Display • In some cases, the text characters displayed on the AV receiver You can search for stations that broadcast traffic news. may not be identical to those broadcast by the radio station. Also, None None unexpected characters may be displayed when unsupported...
Page 27: Using Basic Functions
Turning On & Basic Operations Using Basic Functions Measurement procedure Note • Make the room as quiet as possible. Background noise and Radio To create a listening environment in your home theater that Frequency Interference (RFI) can disrupt the room all listeners will enjoy, Audyssey 2EQ takes measurements Using the Automatic Speaker Setup measurements.
Page 28 Turning On & Basic Operations Turn on the AV receiver and the connected TV. Place the speaker setup microphone at the next Press ENTER. position, and then press ENTER. On the TV, select the input to which the AV receiver Disconnect the speaker setup microphone.
Page 29 • Writing Error! This message appears if saving fails. Try saving again. If this message appears after 2 or 3 attempts, contact your Onkyo dealer. • Speaker Detect Error This message appears if a speaker is not detected. “No” means that no speaker was detected.
Page 30: Using The Listening Modes
Turning On & Basic Operations MOVIE/TV button Using the Listening Modes This button selects the listening modes intended for use with movies and TV. Selecting Listening Modes MUSIC button See “About Listening Modes” for detailed information This button selects the listening modes intended for use (➔...
Page 31 Turning On & Basic Operations About Listening Modes Input Source Speaker Layout The following audio formats are supported by the listening The illustration shows which speakers are activated in each The AV receiver’s listening modes can transform your mode. channel. See “Sp Config (Speaker Configuration)” for the listening room into a movie theater or concert hall, with speaker setup (➔...
Page 32 Turning On & Basic Operations ■ Onkyo-Original DSP Listening Modes Listening Mode Description Input Speaker Source Layout Listening Mode Description Input Speaker T-D (Theater- With this mode you can enjoy a virtual Source Layout Dimensional) surround sound even with only two or three...
Page 33 Turning On & Basic Operations ■ Listening Modes Listening Mode Description Input Speaker Source Layout Listening Mode Description Input Speaker In this mode, audio from the input source is Source Layout output without surround-sound processing. Direct In this mode, audio from the input source is D S D The speaker configuration (presence of output without surround-sound processing.
Page 34 Turning On & Basic Operations Listening Mode Description Input Speaker Note Source Layout These listening modes cannot be selected during USB or iPod playback. Dolby Pro Logic II Dolby Pro Logic II expands any 2-channel The AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player source for 5.1-channel playback.
Page 35: Using The Home Menu
Turning On & Basic Operations ■ Audio Using the Home Menu Selecting Speakers A and B You can change the following settings: “Bass”, The Home menu provides quick access to frequently used You can use two sets of front speakers with the AV “Treble”, “Subwoofer Level”, “Center Level”, settings.
Page 36: Using The Sleep Timer
Turning On & Basic Operations Using the Sleep Timer Setting the Display Brightness Displaying Source Information With the sleep timer, you can set the AV receiver to turn You can adjust the brightness of the AV receiver’s display. You can display various information about the current off automatically after a specified period.
Page 37: Changing The Input Display
Muting the AV Receiver The Music Optimizer function enhances the sound quality You can temporarily mute the output of the AV receiver. When you connect an -capable Onkyo component, you of compressed music files. must configure the input display so that can work Press RECEIVER followed by MUTING.
Page 38: Using Headphones
Turning On & Basic Operations Using Headphones Recording This section explains how to record the selected input Connect a pair of stereo headphones with a source to a component with recording capability. standard plug (6.3 mm) to the PHONES jack. Note AV Recording •...
Page 39: Advanced Operations
Advanced Operations On-screen Setup Explanatory Notes Common Procedures in Setup Menu The setup menus provides a convenient way to change the Menu Sp Config AV receiver’s various settings. Settings are organized into ■ Remote indicator Subwoofer 10 categories. The on-screen menus appear only on a TV that is RECEIVER connected to the HDMI OUT.
Page 40: Setup Menu Items
Advanced Operations Menu item Setting target Setup menu items Level Cal Left (➔ page Center Menu item Setting target Right HDMI Input BD/DVD (➔ page Surround Right VCR/DVR Surround Left CBL/SAT Subwoofer GAME Audio Adjust Input Ch (Mux) (➔ page Input Ch (Mono) TV/CD Panorama...
Page 41: Hdmi Input
Advanced Operations HDMI Input Component (Component Video Input) Note • If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV receiver selects the video source based on the setting of “Component (Component Video Input)”.
Page 42: Digital Audio (Digital Audio Input)
Advanced Operations ■ Subwoofer Digital Audio (Digital Audio Input) Sp Config (Speaker Configuration) ■ Front Small: Menu Digital Audio Menu Sp Config Large: Select based on the cone diameter. If you connect a component to a digital audio input, you Some of the settings in this section are set automatically must assign that input to an input selector.
Page 43: Sp Distance (Speaker Distance)
Advanced Operations Speaker cone diameter Crossover frequency Sp Distance (Speaker Distance) Level Cal (Level Calibration) Over 20 cm 40/50/60 Hz 16 to 20 cm 70/80/90 Hz 13 to 16 cm 100 Hz 9 to 13 cm 120 Hz Menu Sp Distance Menu Level Cal Under 9 cm...
Page 44: Audio Adjust
Advanced Operations Dolby Audio Adjust ■ ■ PL II Music (2ch Input) Neo:6 Music These settings apply to only 2-channel stereo sources. Center Image Panorama 0 to 2 to 5 Menu Audio Adjust With this setting, you can specify by how much the front left and right channel output is attenuated in order to create With the Audio Adjust functions and settings, you can the center channel.
Page 45: Source Setup
Advanced Operations ■ ■ Dynamic EQ Reference Level Source Setup Audyssey Dynamic EQ Reference Level Offset 0 dB: Audyssey Dynamic EQ ® becomes active. This should be used when listening to movies. The Dynamic EQ indicator lights. 5 dB: Items can be set individually for each input selector. With Audyssey Dynamic EQ, you can enjoy great sound Select this setting for content that has a very wide even when listening at low volume levels.
Page 46 Advanced Operations ■ Dynamic Volume A/V Sync About Audyssey Dynamic EQ ® Audyssey Dynamic EQ solves the problem of ■ Light: A/V Sync deteriorating sound quality as volume is decreased by Activates Light Compression Mode. 0 ms to 400 ms in 10 msec steps taking into account human perception and room Medium: When using progressive scanning on your Blu-ray...
Page 47: Hardware
1, 2, or 3 automatically selected as a priority. Normally, the AV receiver detects the signal format When several Onkyo components are used in the same OPTICAL: automatically. However, if you experience either of the room, their remote ID codes may overlap. To differentiate...
Page 48: Hdmi Setup
Advanced Operations Tuner • When the source equipment is connected with the HDMI Setup connection, it may malfunction if “HDMI Ctrl (RIHD)” is set to ■ “On”. AM Freq Step ■ 10kHz: HDMI Through 9kHz: Select the frequency step according to your area. Menu HDMI Setup BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,...
Page 49: Using The Audio Settings
Advanced Operations ■ ■ Audio TV Out Audio Return Ch (ARC) Using the Audio Settings Auto: You can change various audio settings from the Home (➔ page 35). The audio signal from your TV tuner can be sent to menu This preference determines whether the incoming audio the HDMI OUT of the AV receiver.
Page 50 Advanced Operations Speaker Levels Audyssey Late Night ■ ■ ■ Subwoofer Level Audyssey Late Night ➔ page 45 –15 dB to 0 dB to +12 dB in 1 dB steps See “Audyssey” in “Source Setup” ( For Dolby Digital and Dolby Digital Plus sources, the options are: ■...
Page 51 Advanced Operations Music Optimizer CinemaFILTER ■ ■ Music Optimizer Cinema Filter The Music Optimizer function enhances the sound quality Turn this setting on to soften overly bright movie of compressed music files. The M.Opt indicator lights on soundtracks, which are typically mixed for reproduction in the AV receiver’s display.
Page 52: Controlling Other Components
AV receiver is on , the AV receiver will For the latest information on the Onkyo Dock automatically turn on, select your iPod/iPhone as the input components, see the Onkyo web site at: source, and your iPod/iPhone will start playback.
Page 53: Controlling Your Ipod/Iphone
• For detailed operation of iPod/iPhone, please refer to the remote control code 81993 (with instruction manual of the RI Dock. This button does not turn the Onkyo DS-A2 or DS-A2X RI ■ With the RI Control Dock on or off. Also, your iPod/iPhone may not respond the...
Page 54: Controlling Other Onkyo Components
You can use the AV receiver’s remote controller to control controlled by pointing the remote controller at the AV your other Onkyo AV components. This section explains Look up the appropriate remote control code in the receiver, not the component. This allows you to control...
Page 55: Resetting The Remote Mode Buttons
Resetting the REMOTE MODE Buttons Resetting the Remote Controller If you want to control an Onkyo component by pointing the You can reset a REMOTE MODE button to its default You can reset the remote controller to its default settings.
Page 56: Controlling Other Components
By pressing the REMOTE MODE button that’s been Number: 1 to 9, 0 programmed with the remote control code for your TOP MENU Number: +10 component, you can control Onkyo component as DISPLAY / / / , ENTER described below. SETUP...
Page 57 Controlling Other Components ■ CD player / CD recorder / MD recorder operation Press the appropriate REMOTE Available buttons MODE button first. Number: 1 to 9, 0 Number: +10 / / / , ENTER SETUP DISPLAY MUTING DISC +/– SEARCH REPEAT RANDOM MODE...
Page 58: Appendix
If you can’t resolve the issue yourself, try resetting the ■ Make sure that all audio connecting plugs are pushed AV receiver before contacting your Onkyo dealer. Can’t turn on the AV receiver in all the way. To reset the AV receiver to its factory defaults, turn it Make sure that the power cord is properly plugged —...
Page 59 Appendix ■ ■ There’s no sound with a certain signal format About DTS signals Make sure that the speaker setup microphone is not — still connected. Check the digital audio output setting on the — When DTS program material ends and the DTS —...
Page 60 Appendix ■ Can’t control other components Video Tuner If it’s an Onkyo component, make sure that the ■ ■ There’s no picture Reception is noisy, FM stereo reception is noisy, cable and analog audio cable are connected properly. or the FM STEREO indicator doesn’t light Connecting only an cable won’t be enough.
Page 61 Appendix ■ ■ The AV receiver’s remote controller doesn’t functions don’t work USB Device Playback control my iPod/iPhone To use , you must make an connection and an ■ Can’t access the music files on a USB device Make sure your iPod/iPhone is properly inserted in —...
Page 62 Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.
Page 63: Connection Tips And Video Signal Path
Appendix Connection Tips and Video Connection Formats Audio Connection Formats Video Signal Path Video components can be connected by using any one of Audio components can be connected by using any of the the following video connection formats: composite video, following audio connection formats: analog, optical, The AV receiver supports several connection formats for component video, or HDMI, the latter offering the best...
Page 64: Using An Rihd-Compatible Tv, Player, Or Recorder
HDMI, is the name of the system control function found on • The AV receiver will enter standby mode when the power • Sharp TV of the TV is turned to standby. Onkyo components. The AV receiver can be used with ■ CEC (Consumer Electronics Control), which allows Players/Recorders •...
Page 65 Appendix ■ How to connect and setup Change each item in the “HDMI Setup” menu Operate with the remote controller. according to the following settings: (➔ page 54). For buttons that can be operated Confirm the connecting and setting. • HDMI Ctrl (RIHD): On Note 1.
Page 66: About Hdmi
Appendix About HDMI Supported Audio Formats About Copyright Protection • 2-channel linear PCM (32–192 kHz, 16/20/24 bit) The AV receiver supports HDCP (High-bandwidth Digital Designed to meet the increased demands of digital TV, Content Protection) , a copy-protection system for digital HDMI (High Definition Multimedia Interface) is a new •...
Page 67: Usb Features
• Protected WMA music files on an MP3 player cannot be played. ■ AAC (.aac/.m4a/.mp4/.AAC/.M4A or .MP4) • Onkyo accepts no responsibility whatsoever for the loss or AAC stands for MPEG-2/MPEG-4 Audio. damage to data stored on a USB device when that device is used with the AV receiver.
Page 68: License And Trademark Information
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Music Optimizer™ is a trademark of Onkyo Corporation. “HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.”...
Page 69: Specifications
Appendix ■ Specifications Video Section HDMI Input IN 1, IN 2, IN 3, IN 4 Input Sensitivity/Output Level and Impedance Amplifier Section Output 1 Vp-p/75 Ω (Component Y) Video Resolution 1080p 0.7 Vp-p/75 Ω (Component P 1 Vp-p/75 Ω (Composite) Audio Format Dolby TrueHD, DTS-HD Master Audio, Rated Output Power...
Page 70 Appendix Memo En-70...
Page 71 Appendix Memo En-71...
Page 72 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/ Y1112-1 SN 29401054 (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 1 0 5 4 *...
Page 73 HTP-558 5.1ch Home Cinema Package Surround speaker (SKR-558) Supplied Accessories Speaker terminals Make sure you have the following accessories. SKC-391/ SKC-391C Front speaker (SKF-558) (Blue) (Gray) Keyhole slots Surround speakers Speaker cables 8.0 m Caution Powered subwoofer (SKW-558) • The front grilles are not designed to be removed so do not (White) (Red) attempt to remove them forcibly, as this will damage...
Page 74 Using the Floor Pads for Subwoofer To mount the center speaker horizontally, use the two Before Using the Home Cinema keyhole slots shown to hang the speaker on two screws that Package If the subwoofer is placed on a hard floor (wood, vinyl, are securely screwed into the wall.
Page 75: Connecting The Speakers
Enjoying Home Cinema Connecting the Speakers The Home Cinema means that you can enjoy surround Speaker Connection Precautions sound with a real sense of movement in your own home — Read the following before connecting your speakers: just like being in a movie theater or concert hall. •...
Page 76 ■ ■ Center Speaker Surround Speakers (SKR-558) Specifications SKC-391 (European and Australian) Type Full Range Bass-reflex ■ 6 Ω Powered Subwoofer (SKW-558) Type Full Range Bass-reflex Impedance 6 Ω Impedance Maximum input power 120 W Type Bass-reflex Maximum input power 120 W Sensitivity 81 dB/W/m...
Page 77 HTP-558 5.1 Kanal Heimkinopaket Surround-Lautsprecher (SKR-558) Lieferumfang Lautsprecheranschlüsse Überprüfen Sie, ob Sie folgende Zubehörteile bekommen SKC-391/ haben. SKC-391C Front-Lautsprecher (SKF-558) (Blau) (Grau) Befestigungslöcher Surround-Lautsprecher Lautsprecherkabel 8,0 m Achtung Angeschalteter Subwoofer (SKW-558) • Die vorderen Abdeckungen können nicht entfernt werden. Versuchen Sie daher nicht, sie gewaltsam zu (Weiß) (Rot) entfernen.
Page 78 Verwendung der Bodenauflagen für den Subwoofer Um den Center-Lautsprecher horizontal zu montieren, Bevor Sie das Heimkinopaket verwenden Sie die beiden Befestigungslöcher, um den verwenden Wenn der Subwoofer auf einem harten Boden (Holz, Lautsprecher an zwei Schrauben aufzuhängen, die sicher in Vinyl, Fliesen, usw.) aufgestellt wird und die Wiedergabe die Wand geschraubt wurden.
Page 79 Die Freuden des Heimkinos Anschließen der Lautsprecher Mit dem Heimkino können Sie Surround-Klang mit einer Vorsicht beim Anschließen der Lautsprecher echten Bewegungswahrnehmung bei Ihnen zu Hause Bevor Sie Ihre Lautsprecher anschließen, lesen Sie sich genießen – als ob Sie sich in einem Kino oder Konzertsaal folgende Hinweise durch: befinden.
Page 80: Technische Daten
Steuereinheit Sonstiges Magnetische Abschirmung Anschluss Federzug farbkodiert Befestigungsloch Verfügbar Abdeckung Fixiert Sonstiges Nicht magnetische Abschirmung Y1112-1 SN 29400977 (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 0 9 7 7 *...

Onkyo HT-R558 Instruction Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Onkyo HT-R558

Summary of Contents for Onkyo HT-R558

Table of Contents