Creating A Project; Amending A Project; Saving A Project; Printing A Project - Omron CX-Supervisor User Manual

Creating a Project

Note:
6-3 Creating a Project
6-4

Amending a Project

1, 2, 3...
6-5

Saving a Project

1, 2, 3...
Note:
6-6

Printing a Project

1, 2, 3...
80
When the limits shown are reached, no more of those objects can be created.
Remember that although either target can be chosen easily, you must
purchase the correct USB Dongle in order to run
The CX-Supervisor Runtime no longer recognises Software Tokens, Hardlock
(parallel port) dongles or USB Dongles from older versions. Only USB Dongles
for this version will active the Runtime
To create a new project within CX-Supervisor, select New followed by either
Machine Edition project or CX-Supervisor PLUS project. Choose a name and
location. Click OK to create the project.
To amend an existing project it must first be opened (assuming it is not already
open). To open a project select Open from the Project menu. CX-Supervisor
displays the Open dialog box. This is a standard Windows dialog box and
usage depends on your operating system. Please consult your Microsoft
documentation
1. Locate the drive and directory where the desired project is stored.
2. Select the desired project from the list presented.
3. Click the Open button to load the project.
When the project is loaded, the various editing tasks required may be carried
out (such as editing page or graphics formats), as described in the other
chapters of this manual.
When a project has been created it is wise to save it. It is good practice to
ensure that projects are saved regularly, in case of an event such as a power
failure. To save a project, select Save from the Project menu.
If this is the first time the project has been saved, the Save As dialog box
opens.
1. Move to the location where the project is to be stored.
2. Ensure that the Save as Type: field is set to CX-Supervisor Projects
(*.SCS).
3. Enter a name for the project. The name under which the project was
created is offered as a default.
4. Click the Save button to save the project.
Subsequent saves do not cause the Save Project As dialog box to be
displayed.
All of the printable views of the project can be printed together, including page
layouts and all scripts. This can be useful as a development aid, for
maintenance and for project documentation.
1. Start CX-Supervisor and load the project to be printed.
2. From the options dialog box, select the items to print and click OK.
3. Select the printer to print to and click OK.
SECTION 6 Projects