Communication Settings; E.1.2 Communication Settings - Omron CX-Supervisor User Manual

General Use

E.1.2 Communication Settings

Note:
308
The USB port can be used to communicate with compatible Omron hardware.
The CX-Server USB drivers for the USB PLC must be installed manually if
required, and can be found in the CX-Server installation directory.
At runtime, the DyaloX IPC can only use the COM ports that are configured in
the operating system. The Development platform therefore must have the
same COM ports available so they can be selected at development time, and
the same port available for use at runtime. If required, it is possible to
reconfigure the COM port for a configured device once the application is
compiled if the "Embed CX-Server Project within CX-Supervisor .SR2 file"
setting is turned off so the devices settings can be editing on the target
platform.
Appendix E Using with the Omron DyaloX