Omron CX-Supervisor User Manual page 100

Runtime Security
1, 2, 3...
1, 2, 3...
1, 2, 3...
By default, there are four previously defined users listed in the Configured
Users: field: Designer with designer-level privileges, Manager with manager-
level privileges, Operator with operator-level privileges and Supervisor with
supervisor-level privileges. 'Web access' is an additional privilege, it allows the
user to log on to the Standard Web Pages.
To add a new user:
1. Click the Add button. The User Attributes: fields and buttons become
enabled, and the contents of all fields are cleared, ready for a new user to
be added.
2. Type the full name of the new user in the Full Name: field.
3. Type a login name in the Login Name: field.
4. Type a user password in the Password: field. The password must be at
least four characters in length.
5. Select a level of privilege from the Security Level: drop down list.
6. Click the Store button to add the new user to the Configured Users: list, or
the Cancel button to abort the operation.
To modify an existing user:
1. Select a user from the Configured Users: list and click the Modify button.
The User Attributes: fields and buttons become enabled, with the contents
of all the fields filled with the attributes of the selected user.
2. Amend the full name, login name, password and level of privilege in the
same way as adding a new user.
3. Click the Store button to update the user in the Configured Users: list, or
the Cancel button to abort the operation.
To remove a user from the Configured Users: list:
1. Select a user from the Configured Users: list and click the Delete button.
2. A confirmation dialog box opens. Click the Yes button to remove the
selected user or the No button to abort the operation.
When all user amendments are complete, click the Close button.
In the runtime application, to make use of the designated privilege, the user
must log in. Login can be accessed in a variety of ways, and so is dependent
on the setup of the runtime application. Some applications may require login
as soon as the application is run, others may allow login from a context-
sensitive floating menu. Refer chapter 9, Animation for further information. The
Login User dialog box is as follows:
To log in, enter the login name (not the full name) in the Login Name: field and
the associated password in the Password: field. Any characters typed in the
Password: field are disguised by a '*' symbol for each character typed. Click
the OK button to log in or the Cancel button to abort.
For users without a keyboard to enter login details, select the Keyboard
button. The login name and password can be constructed from the
subsequent dialog box by clicking on each button in turn, followed by the
Enter button to complete.
SECTION 6 Projects
99