Omron CX-Supervisor User Manual page 94

Settings
6-10-2-5 Alarm Settings
Note:
To open the Alarm Settings dialog box select Alarm Settings from the Runtime
Settings menu.
In the On Alarm Automatically Display area set the Alarm Status Viewer
and Alarm History Viewer settings as required. When these options are set.
When an alarm occurs, the Current Alarms viewer or Alarm History viewer
(respectively) is automatically displayed in runtime.
Set the Maximum entries in Status Viewer and Maximum entries in History Log
fields to the desired values. The numbers specify how many messages are
displayed in the respective viewer dialog boxs in runtime. Select the Log
system start/stop messages setting to ON if required.
If more messages exist than are requested to be displayed, the most recent
messages are displayed in preference to older messages.
The values shown above are sensible defaults.
In the Alarm Status Messages area, if the User Defined Text option is set,
default messages for Raised Text, Cleared Text, Acknowledge Text, and Auto
Acknowledge Text can be applied. If the Use Language File Text option is set,
the alarm status messages default to the supplied language file.
The Alarm Sound button allows the selection of an audible warning which may
be played when an alarm occurs in runtime. The Open Waveform File dialog
box is shown below:
SECTION 6 Projects
93