Print Preview; Printing - Omron CX-Supervisor User Manual

Printing a Page
1, 2, 3...
Note:
2-4-2

Print Preview

1, 2, 3...
2-4-3

Printing

30
To change the current printer selection:
1. Click the Name: field and select from the list presented.
2. To change the page orientation from portrait to landscape click the
Landscape setting, (or vice-versa).
3. To change the paper size, click the Size: field, and select the desired
paper size from the list presented.
4. To change the paper source, click the Source: field, and select the desired
paper source from the list presented.
5. Click the OK button to exit from the Print Setup dialog box when the
settings are correct.
The Properties button gives access to advanced printer configuration functions
for the selected printer. For details of these functions, refer to the Windows
User Manual, On line Help, or the appropriate Manufacturer's handbook.
To preview the page before printing, select Print Preview from the File menu.
This results in a screen display similar to the following:
To print the page:
1. Click the button, CX-Supervisor displays the Print dialog box.
2. To display the next page, click the Next Page button.
3. To display the previous page, click the Prev Page button.
4. To display the current page, side-by-side with the next page, click the Two
Page button. To return to a single page view click the same button again
which now carries the legend, One Page.
5. Click the Zoom In button. Click it a second time to zoom in to the second
level. This does not zoom into a specific area of the page.
6. To zoom out from a zoomed in view, click the Zoom Out button. Click a
second time to zoom right out.
7. To close the preview screen, click the Close button.
To print a page, click the Print Page button. The Print dialog box opens.
SECTION 2 Pages