Copying An Existing Recipe Definition - Omron CX-Supervisor User Manual

Copying an Existing Recipe Definition

10-6 Copying an Existing Recipe Definition
158
The selected recipe can be redefined as described in chapter 10, Creating a
New Recipe.
The Modify Ingredient and Delete Ingredient buttons on this dialog box
respectively allow the highlighted ingredient to be modified, or deleted
(following confirmation).
When all the information has been provided for the updated recipe, clicking
the OK button saves the recipe details, while the Cancel button aborts this
modify operation.
Open the Recipe Editor dialog box, as described in chapter 10, Viewing
Recipes in the Recipe Editor.
To copy an existing recipe, highlight the recipe from the recipe list and then
type <Ctrl>+C. This creates a copy of the recipe definition on the clipboard. To
paste the recipe definition back in to the current project, type <Ctrl>+V. The
cut, copy and paste operations in the Edit menu may also be used. The
Recipe Editor ensures the name of the recipe is unique by appending a
number to the name. For example, if the original recipe name was "Recipe",
the name of the pasted recipe is "Recipe1". All other properties of the pasted
recipe remain the same as the original recipe definition.
It is possible to copy many recipes at once by highlighting all the desired
recipes in the recipe list. Press and hold the <Ctrl> key and use the mouse to
select recipe definitions one by one, or press and hold the <Shift> key and use
the mouse to select blocks of recipe definitions. When the desired recipes
have been highlighted, the recipe definitions may be copied and pasted in the
usual way.
SECTION 10 Recipes