Chapter 2 Operating Your Frequency Counter
How this Counter Works for You
How this Counter Works for You
The following is a list of some of the key things the Counter does for you.
•
Presets the menus to default states and values at power-up
•
The Counter's Menu key and other front-panel keys allow you to select
such things as the timebase source, the GPIB address, and the RS-232
serial-port baud rate. The Counter also allows you to store your
selections in non-volatile memory; thus, these settings are not lost
when power has been off or after a remote-interface reset.
•
Automatically displays measurement(s) when you have selected a
measurement function.
•
Accepts your entry for a menu item when you press the Enter key.
You must press the Enter key to complete each setting and/or selection.
Saves user configuration settings.
•
Operating Guide
2-3