Using The Menu; Displaying The Menu; Navigating In The Menu And Changing Settings - Agilent Technologies 53151A Operating Manual

NOTE
Chapter 1 Getting Started
Operating the Counter

Using the Menu

The Agilent 53150A/151A/152A Counter has one menu that you use to
control a number of the Counter's features and functions.

Displaying the Menu

To display the Menu, press the Shift key and then the Menu (Reset/Local)
key, as shown below.
Shift
Menu
Reset/
Local

Navigating in the Menu and Changing Settings

Use the Selection (arrow) keys to navigate to the setting you want to
change and then to actually make the changes. For example, the diagram
on the next page shows how to change the setting of the Reference
Oscillator from INTernal to EXTernal. (In this example, a reference signal
is applied to the External Reference connector, but no signal is applied to
the Channel 2 input.)
The Counter will not switch to EXTernal unless a suitable reference
signal is available at the External Reference connector.
1-12
Ch 2
Freq
Shift
Operating Guide