Setting The Number Of Averages - Agilent Technologies 53151A Operating Manual

Chapter 1 Getting Started
Operating the Counter

Setting the Number of Averages

You can set the number of measurements the Counter takes and averages
before displaying the result. The default setting is one (no average
computations are performed when the number of averages is set to one),
and the maximum setting is 99. Note that the tens position (10 through 90)
and the units position (0 through 9) are adjusted separately, and that you
cannot set the number of averages to zero.
Avg
Enter
Enter
Operating Guide
Ch 1
Freq
Ch 1
Freq
Avg On
Ch 1
Freq
Avg On
1-33