Table of Contents
Advertisement
Editing images
Auto Tone Correction
Compensates for the bright (flare, smear) and shadow areas of the image.
1
Click the [Auto Tone Correction] button on the image processing
bar or select [Auto Tone Correction] from the [Image] menu.
The [Auto Tone Correction] palette appears.
[Auto Tone Correction] palette
Item
Apply
Auto
Manual
2
Configure each item.
3
Confirm that [Apply] is checked.
When the settings on the palette are changed, [Apply] is automatically checked
and the settings are applied to the image.
4
Click the [Auto Tone Correction] button on the image processing
bar or select [Auto Tone Correction] from the [Image] menu, and
close the [Auto Tone Correction] palette.
176
Check this box to apply the settings to the image.
Uncheck this box to cancel the settings.
Corrects the image automatically.
You can manually adjust the compensation value by dragging
the slider to the left or right. It can be set from [0] to [100]. Click
or
to set in increments of [1]. You can also directly enter
the value.
Description
Advertisement
Table of Contents
