Windows - Olympus Studio Instruction Manual

Windows

Starting
1
Turn on the camera and set the camera to [CONTROL].
2
Connect the camera to the computer with a USB or IEEE1394
(FireWire) cable.
3
From the [Start] menu on the taskbar, select [Programs >
OLYMPUS Studio > OLYMPUS Studio Camera Control], or
double-click the [OLYMPUS Studio Camera Control] icon on the
desktop.
The camera control window appears.
Closing
1
Select [Exit] from the [File] menu.
The camera control window closes.
2
Use the Remove Hardware function.
3
Disconnect the USB or IEEE1394 (FireWire) cable from the
computer.
4
Turn off the camera.
• Cameras other than an Olympus E-1 or E-300 cannot be operated from the
computer even if they are connected and the camera control window is
launched.
Note
Starting and closing the camera control window
203